• Set the required room temperature by selecting a segment of the circle. During this
selection the set temperature shows in the center of the circle.
• After selection of the required temperature, the room temperature is shown in the
center of the circle. An arrow pointing up indicates that the set temperature is higher
than the room temperature. An arrow pointing down indicates that the set temperature
is lower than the room temperature.
• 'APP' appears in the screen of the hand set after start of the thermostatic operation.
88.3.4
Timer
Set the time interval after which the appliance switches to off.
1. Set a time duration. The maximum time duration is 9 hours and 59 minutes.
2. Press the P
Power button to start the timer.
3. Press the P
Power button again to stop the timer.
Note: At the end of the set time duration the appliance is set to OFF (the pilot
flame is also off). Set programs (see chapter
8.3.5
) are no longer active. Go to
the start screen to start the appliance again.
8.3.5
Program mode
Set the start / stop time and the temperature in a maximum of 8 programs.
Note: The appliance must be ON to set or select a program mode.
Operating the appliance with the Bellfires Gas
app
22
Wifi Box
