13
Bell
fi res
English
Instructions for use & Installation instructions
1.7.5 Extinguishing the fi re
Turn knob
B
, possibly with the remote control, fully to the right to the
l
-symbol and/or
turn the control knob
A
to the right until the stop (“small fl ame” symbol = pilot light
position).
The main burner will still burn for a few seconds, after which it will be extinguished
completely.
1.7.6 Set the display
• After connecting the batteries or when simultaneously pressing
AUTO
and
TIMER,
the display will fl ash. You are now in “
SET”
mode.
• Press
AUTO
to switch from °F (and standard time) to °C (and military time) or
vice versa.
• The display will automatically return to manual mode after some time, but
you may immediately return to
MAN
by pressing the
TIMER
button.
1.7.7 Set the current time
• After connecting the batteries or when simultaneously pressing
AUTO
and
TIMER
,
the display fl ashes. You are in
SET
mode.
• Press to set the hour and to set the minute.
• Wait or press
TIMER
to return to
MAN
mode.
1.7.8 Programming the desired temperature
• Press
AUTO
until display fl ashes.
• Press or to set the temperature.
• Wait or press
AUTO
to switch to automatic mode.
1.7.9 Programming the timer
• Press
TIMER
until P1 fl ashes (heating period 1, heat
ON
)
• Set the time for the beginning of the fi rst heating period by pressing for hour
and for minute’setting.
• Press
TIMER
again; P1 appears on the display.
Set the time for the end of the fi rst heating period.
• Press
TIMER
again to set the second heating period P2 (heat
ON
) and P2
(heat
OFF
).
• Store both heating periods by pressing
TIMER
again.
• If only one heating period is desired, program the same time for P2 and P1.
