Bellfires Corner Bell Large, Installation Instructions And Instructions For Use

Page: 66 / 99

67
Bellfires
English
Instructions for use and installation instructions
4 MAINTENANCE
4.1 ANNUAL MAINTENANCE
It is essential that the appliance, the complete concentric
flue system and the outlet are cleaned and inspected
annually by a recognised fitter/gas specialist. The safe
operation of the appliance will thus remain guaranteed.
Maintenance consists of the following:
l
Remove first the embers and/or vermiculite granules, set of logs and/or pebbles from
the main burner and carefully clean these with a soft brush.
l
Clean and inspect (visually) the main burner, pilot light, combustion chamber,
flue system and combustion air intake. Dust can be removed using a vacuum
cleaner.
l
After cleaning;
Carefully replace the embers and/or vermiculite granules, set of logs and/or pebbles
on and around the main burner according to the installation directions in this
instruction booklet.
Do not place any embers, vermiculite granules, logs or pebbles against the
pilot light burner. Make sure that the pilot flame can burn at all times freely
over the main burner. Only in this way is proper ignition of the main burner
ensured.
Ignoring these directions could lead to a dangerous situation.
l
Check the gas supply, flue system, and combustion air supply route for leaks.
l
Check the correct operation of the gas regulating block, thermocouple
circuit and the ignition of the main burner.
l
Check the gas inlet-pressure (both when the appliance is off and when it burns
at maximum) and the burner pressure.
l
Check the complete concentric flue system including the outlet construction.
l
Check the operation of the thermostatically controlled convection fans.
(If present.)