8
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product. Contact customer service for replacement parts.
Tools Required for Assembly (not included): Phillips Screwdriver and Leak Detection Solution.
Estimated Assembly Time: 60 minutes
WARNING
gas is invisible, odorless, and flammable. An
odorant is normally added to help detect leaks
The odorant can fade over time so leaking gas is
not always detectable by smell alone.
propane will sink to the lowest level possible.
It can ignite by ignition sources including matches,
lighters, sparks or open flames of any kind many
feet away from the original leak.
Use only propane gas set up for vapor withdrawal.
ordinances and codes or with ANS/NFPA 58.
Turn off propane when not in use.
CAU
TIO
N
SERVICE SAFETY
sure propane cylinder valve outlet is clean.
fittings for leaks using soapy water.
Never use a flame.
in any way or use with any device.
WARNING
high surface temperatures. Stay away from
these surfaces to avoid burning skin or
igniting clothing.
the vicinity of the heater.
materials from the heater, or place on or near
the heater.
removed for servicing the appliance prior to
placing back in service.
qualified service person. The heater should be
inspected before use and annually by a
qualified service person.
More frequent cleaning may be required as
necessary.
It is imperative that the control compartment,
burners,and circulating air passageway of the
appliance be kept clean.
SAFETY INFORMATION
