Bellers BLR496, Instruction Booklet, Page: 10 / 36

EN - 9 -
Crisper cover and moisture protection filter
Vegetables and fruits like spinach or broccoli may
emit ethylene gas that may cause spoiling due to
humidity in a short while when they are put into
the crisper. This gas may cause spoiling of other
vegetables and fruits and also smell.
Moisture protection filter adjusts the level of the
humidity caused by the vegetables and fruits inside
the crisper, and thus prevents the smell and
ethylene gas that may spoil other vegetables.
Thus, it helps to keep other vegetables and fruits
fresh.
NOTE: Ensure that this filter does not get wet when you are cleaning the crisper cover.
Therefore, remove the “moisture protection filter” before you clean the crisper cover:
• Take off the moisture protection filter cover by prying it off on two points with a
screwdriver.
• Remove the moisture protection filter.
• After you have cleaned the crisper cover and dried it off, place the moisture protection
filter first.
• Install the moisture protection filter cover properly.
• The service life of the crisper filter is the same as the service life of the refrigerator.
Therefore, there is no need to replace it.
Crisper
Crisper cover
Moisture protection
filter
(On some models)