Page 1
OPERATIONS AND MAINTENANCE PROCEDURES
CONVEYOR TOASTER MODEL – JT1 & JT1-B
UNCRATING AND INSPECTION
Unpack the unit and components from the shipping container. Remove all visible packing
materials including those that may be inside the toasting chamber. If damage is discovered, file a
claim immediately with the carrier that handled the shipment.
ASSEMBLY AND INSTALLATION
Toasters are shipped fully assembled and ready to plug into a matching outlet specified for its
specific voltage and amperage rating. Removal or replacement of the power cord and plug will
VOID the warranty. For assistance, contact the Belleco, Inc. Service Group at 1-877-854-8006.
CAUTION – During installation: Do not place on surfaces or near walls, partitions or
kitchen furniture and the like – unless they are made of non-combustible material or clad with
non-combustible heat-insulating material, and pay attention to fire prevention regulations.
"Bread may burn. Therefore toasters must not be used near or below curtains and other
combustible materials. They must be watched."
"Le pain peut bruler, aussi les grille-pain ne doivent-ils pas etre utilizes a proximite ou sous des
rideaux ou autres materiaux combustibles. Ils doivent etre suveilles."
ELECTRICAL INSTALLATION
WARNING – Disconnect the toaster from its power source before installing or removing
any parts.
WARNING – NEVER operate any piece of equipment without proper GROUND
connection. Improper grounding may result in serious personal injury or could be fatal!
