PAGE 2
OPERATIONS AND MAINTENANCE PROCEDURES
CONVEYOR TOASTER MODEL – JT1 & JT1-B
POWER SAVER FEATURE
All toasters come equipped with a
Rotary Power Saver Switch
. To operate, turn clockwise or
counterclockwise to place the toaster in the following modes:
FULL POWER
– In this position, the toaster is at full heat and ready for toasting.
OFF
– There are two OFF positions provided so that a single rotation in either direction will turn
the toaster OFF.
STANDBY
– When in STANDBY, overall electrical consumption is reduced by 75%. There is
just enough heat to warm the inside toasting chamber walls and reflectors. When switched to the
FULL POWER position, a minimal amount of time is required to reach toasting temperatures.
TOASTING PROCEDURE
A. BREAD TOASTING
•
Turn the Power Saver knob to the “Full Power” position.
•
Set the Conveyor Speed Control knob to 50.
•
Allow 10 – 15 minutes to heat from cold.
•
Place a sample of the desired product on the Conveyor Belt to test the settings.
•
If toasting is too light, turn the Speed Control counterclockwise to a slower speed.
•
If toasting is too dark, turn the Speed Control clockwise to a faster speed.
Buns, Bagels and English Muffins may be tested the same as above but with either Variable Heat
Control reduced. It is recommended by Belleco, Inc. that such one sided toasting be done cut-
side up to prevent lines on the toasted surface.
CLEANING PROCEDURE
Preventive Maintenance programs on your toaster will provide many years of production at full
capacity. Lack of Preventive Maintenance can shorten the life cycle of the toaster and/or result in
reduced capacities. The following cleaning guidelines should be performed as shown:
WARNING – ALWAYS DISCONNECT YOUR TOASTER FROM POWER
PRIOR
TO CLEANING OR MAINTENANCE
