Belle FP600, Instruction Manual

Page: 5 / 12

lower and upper spouts are aligned. Processor bowl has
to be seated neatly on the base of the plastic housing
and the lid with plastic clip is closed and locked in place
(located between the processor bowl and motor housing)
in an anti clockwise
.
•
To activate processor without the blender, blender drive
cover must be closed and locked in an anti clockwise
direction. Processor bowl has to be seated neatly on the
base of the plastic housing and the lid with plastic clip is
closed and locked in place in an anti clockwise
6/ Motor Base
•
Contains the motor which runs both the blender and
processor. The motor base provides drive and electrical
interlocking locations for both blender bowl base and
processor bowl interlocking lid.
CAUTION
: Do not immerse the motor base, its
flexible cord or plug in water or any other liquid.
7/ Plastic spatula
•
Plastic spatula is used for scraping food down the sides
of blender and processor bowl.
CAUTION
: Before disassembling the product or
removing food, turn off the power point switch and
disconnect plug from the power point
8/ Food Plunger and dispensing chute
•
Plunger fits into the dispensing chute. Always use
plunger when slicing or shredding as it allows you to
vary the pressure when using the cutter blade. It also
stops food from splashing out of the chute when using
the stainless steel blade, plastic mixing blades or slicing
and grating disk.
9/ Processor cover with plastic interlock switch activator
clip