BC 350 Operators Manual
BC 350 Operators Manual
6
Health And Safety
Vibration
Some vibration from the BC350 Saw operation is transmitted through the handle to the
operator’s hands. Refer to specifications & technical data for vibration levels and usage
times (recommended maximum daily exposure time).
DO NOT
exceed the maximum
usage times.
PPE (Personal Protective Equipment)
Suitable
PPE
must be worn when using this equipment i.e. Safety Goggles, Gloves, Ear
Defenders, Dust Mask and Steel Toe capped footwear.
Wear clothing suitable for the work you are doing. Tie back long hair and remove any
jewellery which may catch in the equipment’s moving parts.
Dust
The sawing process will occasionally produce dust, which may be hazardous to your
health. Always wear a mask that is suited to the type of dust being produced.
Fuel
•
Before refuelling, switch off the engine and allow it to cool.
•
Spilt fuel must be made safe immediately, using sand. If fuel is spilt on your
clothes, change them.
•
Store fuel in an approved, purpose made container away from heat and
ignition sources.
•
Do not ingest fuel or inhale fuel vapours and avoid contact with your skin.
Wash fuel splashes immediately.
•
If you get fuel in your eyes, irrigate with copious amounts of water and seek
medical attention as soon as possible.
Exhaust Fumes
•
Do not operate the floor saw indoors or in a confined space, make sure the
work area is adequately ventilated.
GB
WARNING
!
The exhaust fumes produced by this equipment are highly toxic and
can kill!
WARNING
!
Fuel is flammable. It may cause injury and property damage. Shut
down the engine, extinguish all open flames and do not smoke while
filling the fuel tank. Always wipe up any spilled fuel.
11
Maintenance
After the working day, it is recommended that the pum function is placed into a clean
water recipient. Thus you eliminate and residue from the the inner circuit.
In any case, after the daily work, in order to avoid damages, take the water pump out of
the pan. If not, the mud produced by the dusty sediment may deposit on the pump
turbine arms, hindering their rotation.
WARNING
!
WITH REGARD TO ANY CLEANING, REPAIRING OR
MAINTENANCE OPERATION, MAKE SURE THAT THE ELECTRICAL
NET FEEDING PLUG IS DISCONNECTED. YOU MUSN’T USE
WATER UNDER PRESSURE TO CLEAN ANY CIRCUITS.
The BC 350 Saw has been designed and made for straight and mitre cuts on any kind of
material, such as, tile, stoneare, bricks and marble. Any modification of the saw, aswell
as misuse is considered inappropriate and dangerous. In case of material or physical
damages due to the nonobservance of the above recommendations, Belle Group is free
from responsibility.
The machine only needs simple maintenance.
Clean the machine as often as needed to that dust and other residues from cut materials
do not hinder the function of the water pump.
Any maintenance work is to be carried out by trained individuals.
GB
