Belle Group MINIMIX 130, Operator'S Manual

Page: 4 / 44

4
Minimix 130 OPERATORS MANUAL
READ THESE SAFETY INSTRUCTIONS
Please read and understand all running/safety instructions before operating this machine.
Before starting the mixer
Check that all guards are in position and correctly fitted.
DO NOT wear loose clothing or jewellery that may become entangled in the workings of this machine.
Suitable clothing as follows should meet relevant EEC/local safety standards: overalls, work boots, goggles,
face mask, gloves and ear defenders etc.
DO NOT tip mixer onto the drum mouth when motor is running.
Ensure that any trailing cable is protected against damage and not liable to be tripped over or trapped
underneath the mixer.
We recommend the use of an Residual Current Device on 230v electrics.
When operating the mixer
Keep unauthorised persons away from mixing drum.
Keep area around the mixer clear of obstructions which could cause persons to fall onto moving parts.
Always ensure mixer is on level ground before mixing.
DO become familiar with the controls before operating this machine.
DO ensure that all guards are fitted in the correct position.
DO replace any worn/damaged warning decals.
DO ensure the drum is rotating while emptying the mixer.
DO always switch off and remove the plug from the socket if leaving the machine unattended.
DO NOT use as a wheel barrow. Disconnect from power supply before moving.
BEWARE of the danger zones.
Emergency Stop
If you have to turn off the mixer in a emergency you must either turn off at switch or at the mains.
Fire Fighting
If your mixer catches fire, turn off the electric supply. Using a dry powder or C0
2
fire extinguisher put out the
fire. If the fire can not be put out, keep away and call the fire brigade.
If you are in any doubt about the safety condition of your machine, please contact your Belle authorized Service
Dealer.
SAFETY INSTRUCTIONS
GB