BellCount S515
USER'S MANUAL
Rev. 2017-03-15
Page 24 of 44
6.9 Note Reject and Error Messages
Possible error messages during power-on self-test:
Error Message:
Cause:
Solution:
Feeding Fault
A feeding error has occurred.
Remove any banknotes from the Hopper
and/or clean Hopper (sensor) for dust.
Receiving Fault
There are banknotes in the Stacker, or a
dust related problem has occurred.
Remove any banknotes from the Stacker
and/or clean Stacker (sensor) for dust.
Rejector Fault
Remove any banknotes from the Reject
Pocket and/or clean Reject Pocket (sensor)
for dust.
UV Fault
Error related to the UV sensor.
Check that the Top Cover is firmly locked.
Remove any strong light sources above the
machine.
Clean the Note Path.
Left#1 Counting Fault
Left#2 Counting Fault
Right#1 Counting Fault
Right#1 Counting Fault
Error related to the banknote position
sensors.
Remove any banknotes from the machine
and/or clean the Note Path.
Left CIS Fault
Right CIS Fault
Error related to the CIS scanner.
Remove any banknotes from the machine
and/or clean the Note Path.
Rotate#1 Speed Fault
Rotate#2 Speed Fault
Error related to the internal speed
measurement.
Contact authorized technical support.
CIS#1 Fault
CIS#2 Fault
CIS#3 Fault
Error related to the CIS scanner.
Remove any banknotes from the machine
and/or clean the Note Path.
AD Fault
General internal error occurred.
Turn off the machine and restart it.
Brake Fault
Internal braking error.
Contact authorized technical support.
Diverter #1 Fault
Diverter #2 Fault
Diverter #3 Fault
Diverter #4 Fault
Internal mechanical error.
Contact authorized technical support.
Left BackIR Fault
Right BackIR Fault
Error related to IR sensors.
Open the Rear Service Drawer, remove any
banknotes and/or clean for dust.
Please Clean Left
Counting Sensor
Error related to the banknote position
sensors.
Remove any banknotes from the machine
and/or clean the Note Path.
Please Clean Right
Counting Sensor
Error related to the banknote position
sensors.
Remove any banknotes from the machine
and/or clean the Note Path.
MG#1 Fault
MG#2 Fault
MG#3 Fault
Magnetism sensor error.
Contact authorized technical support.
MG#4 Fault
MG#5 Fault
Magnetism sensor error.
Contact authorized technical support.
MG#6 Fault
MG#7 Fault
MG#8 Fault
Magnetism sensor error.
Contact authorized technical support.
MID-MG Fault
MID-MT Fault
Magnetism sensor error.
Contact authorized technical support.
