11
Setting Up The Machine Using The Ground
Coffee Adaptor
The ground coffee adaptor allows you to create your own favorite blend of coffee.
Personalize your blends by adding a dash of cinnamon, orange peel, cardamom
or vanilla bean for flavoring, to name a few options.
NOTE:
For best results, use medium ground coffee.
WARNING:
Before brewing, it is recommended the water tank be filled at least to
the lowest 6-oz. step. To avoid damage to your Coffee Maker, never operate your
Single Serve Coffee Maker when the water tank is empty.
1. Lift the water tank lid located at the top back of the unit.
(See Figure 1.)
2. Using the desired cup, mug, or tumbler as your measure, add water to
the water tank. The water tank has an easily visible, stepped water level
indicator. Add water to the desired fill line to brew one cup of any hot
beverage. The level indicator marks 6-oz., 10-oz., and 15-oz. However, any
amount of water may be added. DO NOT EXCEED the 15-oz. MAX fill line.
3. Lower the lid.
IMPORTANT:
For optimal flavor, distilled water is preferred.
4. Position the cup under the nozzle and onto the center of
the drip tray cover.
5. Pull the adaptor compartment’s front tab up to unlock and lift the lid.
6. Choose the ground coffee adaptor. Fill the reusable ground coffee adaptor to the designated fill line,
or to taste. DO NOT EXCEED the MAX fill line.
It is recommended to use one 1 tbsp of ground coffee for every cup of water.
7. With the handle facing front, place the ground coffee adaptor into the adaptor compartment.
Slide the adaptor handle into the grooves at the front of the Coffee Maker. (See Figure 6.)
8. Press the adaptor compartment’s lid down firmly. An audible click can be heard as the lid is locked firmly
into position.
9. Plug the Coffee Maker into a 120V AC electrical wall outlet.
10. Press the GROUND COFFEE button to begin the brew cycle.
11. The red HEATING indicator light will begin to flash as the Coffee Maker begins heating the water.
12. When the water has reached the optimum temperature, the heating light will go out and the blue
BREWING light will illuminate.
13. The pump will then activate and coffee will begin to stream through the nozzle.
14. To interrupt the brewing cycle at any time, press the GROUND COFFEE button. Then remove the plug from
the wall outlet.
15. At the end of the cycle, the Coffee Maker and all indicator lights will automatically turn OFF.
16. Unplug the Coffee Maker when not in use.
Setting Up Your TripleBrew Coffee Maker To Boil Water
Heating plain water in your Single Serve Coffee Maker is quick and easy. Water is dispensed at the perfect
temperature for preparing single cups of bagged teas, instant soups, quick cooking oats, packaged hot chocolate,
hot apple cider or anything that requires boiling water.
WARNING:
Before brewing, it is recommended the water tank be filled at least to the lowest 6-oz. step.
To avoid damage to your Coffee Maker, never operate your Single Serve Coffee Maker when the water tank is
empty. DO NOT EXCEED the 15-oz. MAX fill line.
IMPORTANT:
To prevent tainted or “off” flavors when changing hot beverages, while the unit is OFF, use a damp
paper towel to completely remove any residue from the adaptor compartment.
1. Follow detailed brewing instructions described previously.
2. Following package instructions, add the specified amount of cold water to the water tank, never adding
less than 6-oz or more than 15-oz
3. Prepare your cup, mug, or tumbler by placing the item of your choice into the mug
4. Select either adaptor. With the handle facing front, place the adaptor of choice into the adaptor
compartment. Slide the adaptor handle into the grooves at the front of the coffee maker.
5. Following detailed instructions described previously, adjust the drip tray to accommodate your cup, mug,
or tumbler.
6. Center the cup under the nozzle and press the CAPSULE button.
7. After water has been heated and dispensed, stir contents of mug well.
Figure 6
Ground
Coffee
Summary of Contents for 14405
Page 2: ......