060512A-1 8
(Figure 1)
NOTE:
If you do not have a standard
modular wall jack, have a qualified
technician mount one on the wall.
Handset Retainer Tab Installation
If the base unit is to be placed in the
wall mount position, the handset retainer
tab must be pulled out, turned around
and placed in the opposite direction, so
that the tab allows the handset to hang
onto the base unit, as shown in figure 2
(Figure 2)
OPTIONAL AC ADAPTOR
CAUTION:
Use only with Class 2
AC Adaptor (not included)with a rating
of 120VAC input, DC6V, 100 mA
output with a center tip that is negative.
The adaptor plug must correctly fit the
machine’s DC jack.
1. Plug the AC Adaptor into a standard
AC outlet.
2. Insert the small plug into the DC
jack on the rear of the base.
NOTE:
If you wish to order the optional
AC Adaptor, an Accessory Order Form
has provided with this unit.
TELEPHONE SETTINGS
The screen will display prompts to help
you set up the telephone when you first
install it. You can always get back to
these setup screens by pressing
OPTIONS
.
NOTE:
You can exit feature setup at
any time by pressing
CLEAR
or by
lifting the handset when there is no
incoming call.
Language selection
You can select
ENGLISH,
ESPANOL
(Spanish) or
FRANCAIS
(French) as the language in which your
screen prompts are displayed. When you
first install batteries, the screen displays:
1. Press
CALL LIST
or
CALL
LIST
until the screen displays
your language selection.
2. Press
OPTIONS
to save your
setting, and move to the next option.
Set contrast
Adjust screen brightness to a
comfortable level, from 1 (light) to 4
(dark).
1. Press
OPTIONS
repeatedly until
the screen displays:
2. Press
CALL LIST
or
CALL
LIST
until the screen displays
the contrast level you prefer.
Telephone
Modular Wall
Jack
Studs
Modular
Wall
Plate
Wall Mount
slots
Base Unit
(Side View)
Handset
Retainer
Tab
12:00
AM
1-01
WHICH LANGUAGE?
12:00
AM
1-01
2
SET CONTRAST
