BHT-407-MM-1
5-00-00
4 OCT 2013 Rev. 38
Page 57
Export Classification C, ECCN EAR99
c.
remove and discard the engine to transmission
driveshaft assembly.
Chapter 65
3.
Disassemble the tail rotor driveshafts and examine them
for condition.
Chapter 53
4.
Accomplish waviness check of the tailboom skin. If
waviness exceeds limits, send tailboom to a Bell Helicopter
approved structural repair facility.
Chapter 32
5.
Damage or distortion of the tail skid and the mounting
points is not cause to send the tailboom for repair on an
alignment fixture. Repair or replace the damaged parts.
Chapter 53
6.
Examine the tailboom skin for damage in the area of the tail
rotor blade tip path. Repair or replace the damaged area.
Chapter 32
LANDING GEAR
1.
Examine the landing gear for condition and security.
Examine the components that follow:
a.
Skid tubes.
b.
Skid saddles.
c.
Skid shoes.
d.
Retaining strap and rubber cushion.
e.
Rocking beam.
f.
Crosstubes.
g.
Attachment fittings.
2.
Do a crosstube deflection check.
CONDITIONAL INSPECTIONS
5-27. HARD LANDING (CONT)
DATA REFERENCE
INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
