Pur
e
A
V
P
o
w
er C
ons
ole
Hookup and Installation
Step 2
Remote AC Operation
This function allows you to turn your Power Console on and off via your
preamplifier or receiver equipped with a switched AC power outlet.
Note:
You cannot turn off the switched outlets on the Power Console
with the switched button on the front of the unit when there
is any external power signal supplied to either the AC or DC
remote inputs.
To install the Remote AC Control Cable:
A.
Plug the female end of the included Remote AC Control Cable into the
‘Remote AC IN’ outlet located on the back of the Power Console. (Fig. 2a)
B.
Press the “Remote” button on the front of the Power Console to turn on
the remote function. The "Remote ON" indicator should be lit. (Fig. 2b)
C.
Press the “Switched” button on the front of the Power Console to turn
off the switched outlets.
E.
Connect the 2-pronged male end of the Remote AC Control Cable into
a switched power outlet on a preamplifier or receiver. When you turn
on the receiver or preamplifier the outlets on the Power Console that
are programmed as “Switched” will be turned on immediately and the
“Switched/ Delayed” outlets will come on after an 8 second delay.
7
Figure 2b
Figure 2a
