Belkin PureAV PF40, User Manual

Page: 14 / 28

13
Pur
eA
V P
o
w
er C
ons
ole
Hookup and Installation
Step 7
Connect High-Current Audio Filter (8 second delay)
These outlets are specifically designed to filter out AC line noise while
delivering maximum current to power-hungry amplifiers and other high-
current audio components. The High-Current outlets are also equipped
with an 8 second delay. This allows your high-current amplifiers to turn on
last and turn off first, avoiding that annoying “thump” from getting to your
speakers and potentially damaging them.
A. Attach PureAV power cord labels to each component’s power cord
before you plug the cord into the corresponding outlet on the Power
Console.
B. AMP 1 – Connect your main amplifier power cord to the outlet labeled
“AMP 1”.
C. AMP 2 – Connect your secondary amplifier power cord to the outlet
labeled “AMP 2”.
Note: You can connect any type of high-current audio component into
any of the High-Current outlets. You are not limited to the
components listed above.