Pur
eA
V
HD
TV
P
ow
er
C
onditioner
Hookup and Installation
Step 3 Remote AC/DC Control
The PureAV HDTV Power Conditioner is equipped with a Remote AC/
DC Control jack (remote trigger). This allows you to power on and off
the switched outlet on your PureAV HDTV Power Conditioner via the
power switch on another component (receiver/preamp or other custom
installation component) that is equipped with a “trigger out” or remote
output jack.
1.
Before connecting the cable, make sure that the power switch is in the
OFF position.
2.
Plug in the Remote AC/DC Control cable (1/8” mini-jack cable included)
to the corresponding remote input on the PureAV HDTV Power
Conditioner (labeled as “AC/DC IN 3~30V 10mA”).
3.
Plug the other end of the Remote AC/DC Control cable into the
corresponding remote output on the component of your choice (this
may be a custom installation component, receiver/preamp, etc.).
Your PureAV HDTV Power Conditioner is now set up for remote operation.
7
