Belkin OmniView F1DA104P, User Manual

Page: 20 / 36

17
1
2
3
4
5
6
7
8
9
10
Using your PRO2 PS/2
se
ct
io
n
3
� � � � �
� �
�
� � � � �
� � � �
�
� � � �
� � � �
� � � � �
� �
�
� � � � �
� � � �
�
� � � �
� � � �
� � � � �
� �
�
� � � � �
� � � �
�
� � � �
� � � �
Selecting a Computer Using Keyboard Hot Key Commands:
Switch to the next or previous port with simple keyboard key sequences
using the “Scroll Lock” key and either the up or down arrow keys. To
send commands to the PRO2 PS/2, the “Scroll Lock” key must be
pressed twice within two seconds. The PRO2 PS/2 will beep, confirming
that it is in hot key mode. Next, press the up or down arrow keys, and the
PRO2 PS/2 will switch to either the prior port or the next port.
With a single-switch configuration (no daisy-chained switches), you can
switch directly to any port by entering the two-digit number of the port
you wish to access. For example, if you press “Scroll Lock”, “Scroll
Lock”, “02”, the PRO2 PS/2 will switch to the computer on port 2 located
on BANK 00.
Note:
You will have approximately five seconds to complete each hot key
sequence.
With daisy-chain switch configuration, you can switch between BANKs
by pressing “Scroll Lock”, “Scroll Lock”, “Page Up”, to switch to the
previous BANK. Press “Scroll Lock”, “Scroll Lock”, “Page Down”, to
switch to the next BANK.
Switch to next active port—Down arrow Switch to next active port—Up arrow
Switch to BANK 00, Port 2—(02)
Switch to previous BANK—Page Up Switch to next BANK— Page Down