Installation
2
Step 1: Remove the contents from the box.
Step 2: Install the rack-mount brackets and place the Switch on a rack.
Step 3: Decide whether the Switch will be used in a single-unit configuration
or in a daisy-chained configuration. If the unit will be used in a
daisy-chained configuration, skip to Step 1 of “Daisy-Chain
Configuration”. Otherwise, proceed to Step 4.
Step 4: Attach the IEC power cable to the power connector located on the rear
of the Switch.
Step 5: Using an RJ45 CAT5 or CAT6 cable, connect to a free port on your
KVM Switch.
Initial switch position for video compensation
Length of
Low resolution
Medium resolution
High resolution
CATX cable
640x480 to 1024x768
800x600 to 1600x1200
1024x1280 to 2048x1536
0-200 ft.
Position 0
Position 0
Position 0
100-300 ft.
Position 1
Position 1
Position 2
200-400 ft.
Position 2
Position 4
Position 5
300-500 ft.
Position 3
Position 5
Position 6
400-600 ft.
Position 4
Position 6
Position 7
500-700 ft.
Position 5
Position 6
Position 7
600-800 ft.
Position 6
Position 6
Position 7
700-900 ft.
Position 6
Position 6
Position 7
800-1000 ft.
Position 7
Position 7
Position 7
S
S
S
N
±
S
S
N
P74344ea_F1DW116-216C_QIG 17-10-2003 16:51 Page 4
