Back Panel
[R
DIAGRAM
FOR
N150
N300
N450_back.ai]
A)
Modem
(WAN)
Connector
Connect
your
modem
to
this
port
using
an
Ethernet
cable.
B)
Wired
(LAN)
Connectors
Connect
computers
and
other
wired
network
devices
to
these
ports
using
Ethernet
cables.
C)
Reset
Button
This
button
is
used
to
restart
your
Router
in
rare
cases
when
it
functions
incorrectly.
Resetting
the
Router
will
preserve
your
settings.
This
button
may
also
be
used
to
restore
the
factory
default
settings.
Please
see
the
Troubleshooting
section
for
more
information.
D)
Power
Connector
Connect
the
included
power
supply
to
this
jack.
Technical Details
Technical Features
Integrated 802.11n Wireless Access Point
Utilizing Dual-Band Network technology, your Router creates two
separate networks (one at 2.4GHz band and the other at 5GHz), allowing
increased bandwidth to all your connected wireless devices and
computers.
NAT IP Address Sharing
To save you the cost of adding IP addresses per computer in your house,
your Belkin Router uses Network Address Translation (NAT) technology,
allowing you to share a single IP address across your network.
SPI Firewall
Your Router is equipped with a firewall that will protect your network
from a wide array of common attacks and viruses.