26
TROUbleshOOTInG, sUPPORT, anD WaRRanTY
I’ve installed this new Router and some of my network clients
(computers, game consoles, etc .) are now unable to connect .
Your new Router came pre-configured with a network name and
password, found printed on an attached card . All clients must use this
network name and password to connect wirelessly to your Router .
You will need to find the network settings on your client, select the
network name printed on the card from the list of available networks,
and enter the password when prompted to join the wireless network .
limiting the wireless transmit rate—
Limiting the wireless transmit
rate can help improve range and connection stability . Most wireless
cards have the ability to limit the transmission rate . To change this
property in Windows, go to the Windows Control Panel, open “Network
Connections”, and double-click on your wireless card’s connection . In
the properties dialog, select the “Configure” button on the “General”
tab, then choose the “Advanced” tab and select the rate property .
Wireless client cards are usually set to automatically adjust
the wireless transmit rate for you, but doing so can cause
periodic disconnects when the wireless signal is too weak; as
a rule, slower transmission rates are more stable . Experiment
with different connection rates until you find the best one
for your environment . Note that all available transmission
rates should be acceptable for browsing the Internet . For
more assistance, see your wireless card’s user manual .
