97
96
Appendixes
97
96
Client IP Filters
The Router can be configured to restrict access to the Internet, email,
or other network services at specific days and times. Restriction can be
set for a single computer, a range of computers, or multiple computers.
URL Blocking
To configure the URL blocking feature, specify the websites (www.somesite.
com) and/or keywords you want to filter on your network. Click “Apply
Changes” to activate the change. To complete this configuration, you will
need to create or modify an access rule in the client IP filters section. To
modify an existing rule, click the “Edit” option next to the rule you want
to modify. To create a new rule, click on the “Add PC” option. From the
“Access Control Add PC” section, check the option for “WWW with URL
Blocking” in the “Client PC Service” table to filter out the websites and
keywords specified.
Schedule Rule
To configure the schedule rule, specify the name, comment,
start time, and end time that you want to filter on your
network. This page defines schedule rule names and activates
the schedule for use in the “Access Control” page.
MAC Address Filtering
The MAC address filter is a powerful security feature that allows you
to specify which computers are allowed on the network. Any computer
attempting to access the network that is not specified in the filter list will
be denied access. When you enable this feature, you must enter the MAC
address of each client on your network to allow network access to each
or copy the MAC address by selecting the name of the computer from
the “DHCP Client List”. To enable this feature, select “Enable”. Next, click
“Apply Changes” to save the settings.
DMZ
If you have a client PC that cannot run an Internet application properly from
behind the firewall, you can open the client up to unrestricted two-way
Internet access. This may be necessary if the NAT feature is causing problems
with an application such as a game or video conferencing application. Use
this feature on a temporary basis. The computer in the DMZ is not protected
from hacker attacks. To put a computer in the DMZ, enter the last digits of
its LAN IP address in the “Static IP” field and click “Apply Changes” for the
change to take effect. If you have only one public (WAN) IP address, then you
Summary of Contents for F5D7632uk4v3000
Page 107: ...107 107 2 1 3 4 5 6 7 8 9 10 ...