83
83
Using the Web-Based Advanced User Interface
1
2
3
4
5
6
7
8
9
10
11
12
se
ct
io
n
Setting Client IP Filters
The Router can be configured to restrict access to the Internet, e-mail,
or other network services at specific days and times. Restriction can be
set for a single computer, a range of computers, or multiple computers.
To restrict Internet access to a single computer for example, enter the
IP address of the computer you wish to restrict access to in the IP
fields
(1)
. Next, enter “80” in both the port fields
(2)
. Select “Both”
(3)
.
Select “Block”
(4)
. You can also select “Always” to block access all
of the time. Select the day to start on top
(5)
, the time to start on
top
(6)
, the day to end on the bottom
(7)
, and the time to stop
(8)
on
the bottom. Select “Enable”
(9)
. Click “Apply Changes”. The computer
at the IP address you specified will now be blocked from Internet
access at the times you specified.
Note:
Be sure you have selected the
correct time zone under “Utilities> System Settings> Time Zone”.
(1)
(2)
(3)
(4)
(7)
(8) (9)
(5)
(6)
