12
USING THE POWERLINE CONFIGURATION UTILITY
The Network Tab
The “Network” tab shows the MAC address and data rate of all remote
powerline products on your network. This is a “snapshot” of the data rate at
the time of the scan. Pressing the “Scan Powerline Network”
(a)
button may
get a different result.
Note: This screen will not show a powerline device that is directly connected to
your computer. If a remote powerline device in your network is not listed in the
screen below, make sure that its network password is the same as your current
private network password. See the “Security Tab” section for how to set up your
network password.
a
