manualshive.com logo in svg

Belkin F1DP1XXG, User Manual

Share
Download
Belkin F1DP1XXG User Manual Download Page 58

54

Performance Settings (Bandwidth)

You can adjust the bandwidth settings on the Switch to give you the desired 
compression and color-support levels for your remote sessions.

To change the bandwidth settings:

1. 

 In the quick-access toolbar, click on 

. The Performance-Settings box 

will appear (see Fig. 19).

Fig. 19 Performance-Settings Box

2. 

Select one of the following bandwidth options:

•   Adaptive— 

Automatically adapts to the best compression and colors 

•   Adaptive— 

•   Adaptive— 

based on activity.

•  Low— 

Provides high compression and 16-color support.

•   Medium— 

Provides medium compression and 256-color support. 

Medium is recommended when accessing the Switch over an 
Internet connection.

•   High— 

Provides low compression and high, 16-bit color support. This 

setting provides optimal performance when working on a LAN. 

•   Custom— 

Allows you to select your own compression and 

•   Custom— 

•   Custom— 

color-support levels. Choose between Low, Medium, and High 
compression, and 16-, 256-, and High (16-bit) color support.

3. 

 When finished, click “OK” to save the setting. The screen of the last 
accessed target server will appear.

Using the Switch from a Remote Console

Summary of Contents for F1DP1XXG





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands