2
Belkin
®
Advanced Secure Windowing KVM User Manual
SectionS
Table of Contents
2
3
4
5
6
InTroduCTIon
1
safety Precaution
Please read the following safety precautions carefully before using
the product:
• Before cleaning, disconnect the product from DC power.
• Be sure not to expose the product to excessive humidity.
• Be sure to install the product on a clean secure surface.
• Do not place the DC power cord in the path of foot traffic.
• If the product is not used for a long period of time, remove the
product’s wall-mount power supply from the mains jack.
• If one of the following situations occurs, get the product checked
by a qualified service technician:
– The product’s power supply is overheated, damaged, broken,
causes smoke or shortens the mains power socket.
– Liquid penetrates the product’s case.
– The product is exposed to excessive moisture or water.
– The product is not working well even after carefully following
the instructions in this user manual.
– The product has been dropped or is physically damaged.
– The product has obvious signs of breakage or loose internal
parts.
• The product should be stored and used only in temperature- and
humidity-controlled environments as defined in the product’s
environmental specifications.
• The wall-mount power supply used with this product should be
the model supplied by the manufacturer or an approved equivalent
provided by Belkin or an authorized service provider. The use of
an improper power source will void product warranty.
• Product contains internal battery. Battery is non-replaceable.
Never attempt to replace battery as any attempt to open product
enclosure would permanently damage the product.
baCK To Table of ConTenTs >
