17
Belkin
®
Advanced Secure Windowing KVM User Manual
InsTallaTIon
SectionS
Table of Contents
1
2
4
5
6
3
before Installation
unpacking the Product
Before opening the product sealed packaging, inspect the seal
condition to assure that product was not accessed or tampered with
during delivery. If packaging seal looks suspicious, contact the Belkin
support team and do not use the product.
After removing the seal, inspect packaging contents to verify that the
required components are included. See packaging content list on page 2.
After the Belkin Advanced Secure Windowing KVM is removed from its
packaging, inspect the tamper-evident label to assure that the product
is properly sealed. If the label is damaged or missing, contact Belkin
support and do not use the product.
Where to locate the belkin advanced secure Windowing KVM?
The enclosure of the product is designed for desktop or under-the-table
configurations. An optional mount kit is available.
Product must be located in a secure and well-protected environment to
prevent potential attacker access.
If a longer set of cables or if a Secure Fiber Extender (RFE) is used, the
Belkin Advanced Secure Windowing KVM may be remotely located in a
locked-down facility to prevent access to unauthorized users.
Consider the following when deciding where to place the Belkin
Advanced Secure Windowing KVM:
• User access to the front-panel push buttons is typically not
required as all user controls are available through the mouse and
indications available on screen.
• Keyboard and mouse cable length. Cables typically may be
extended to a distance of 4.6 meters (15 feet).
• Display cable length. The Belkin Advanced Secure Windowing
KVM may be extended to around 10 meters without video quality
degradation (depends on display and cable quality and must be
tested prior to fixed installation).
• The location of the computers in relation to the KVM and the
length of available KVM cables (typically 1.8 meters)
note:
Due to USB and DVI signal limitations, the KVM cable length
cannot exceed 4.6 meters (15 feet) unless an active extender is used.
Warning:
Avoid placing cables near fluorescent lights, air-
conditioning equipment, RF equipment or machines that create
electrical noise (e.g., vacuum cleaners)
baCK To Table of ConTenTs >
