24
Belkin® Secure Desktop Controller Unit (DCU) User Manual
-
8820-00778 Rev. A00
O
nce file was loaded successfully – the message in the picture above
will be shown.
If loaded file is different from the current system configuration, the
following error message will appear:
In case that the loaded file is corrupted – the following message will
appear:
“File DCUXC000 is corrupt
. Try to load another file.”
After configuration file was loaded – recycle the power to the system to
resume normal operation.
It is recommended that after configuration loading the administrator
will test each channel and option in the configured Belkin Secure DCU
to verify that configuration process completed according to the
required setting.
Option 6 – Save Configuration
This setup option allows system administrator to save the current Belkin
Secure DCU configuration on the microSD card.
Note:
Only microSD card supplied by Belkin will work with Belkin Secure
DCU. Special binary formatting required for proper operation with the
product.
Note:
Belkin MicroSD card is not included with this product and has to be
order separately.
Note:
Do not use PC or devices other than Belkin Secure DCU to change the
files stored on this microSD or files / card may become unusable!
Make sure that the microSD card is properly inserted at the Belkin
Secure DCU microSD card slot before attempting to save a
configuration.
To access the Save configuration option – select the sixth line from the
setup menu and enter the Save configuration menu.
Installation
Table of Contents
SECTIONS
1 2
3
4 5 6 7
