7
Once all connected devices are
charged (approximately 4 hours), the
LED light will flash 3 times and your
Conserve Valet will power down.
If you connect an additional device
during charging, the Valet will restart
the charge time to ensure that the
new device is fully charged before
powering down. If you unplug all your
devices, the Valet will automatically
power down after 2 minutes.
NOte:
When sitting idle, the
Conserve Valet uses no power.
DEVICES YOU CaN ChaRGE
wITh ThE CONSERVE ValET
Most MP3 players, smart phones, digital
cameras, and other portable devices
that use a USB input to charge should
work with the Conserve Valet.
Devices with large color screens, such as
smart phones, often require a lot of power to
charge. It is recommended you only charge
two of these devices at the same time.
You will be able to charge most of your devices
with the Conserve Valet (5-volt USB charge).
You should use your device’s included USB
charge cord when connecting to the Conserve
Valet. If your device did not come with a USB
cord, check with the device’s manufacturer
for USB cord availability. The included Belkin
USB cords are compatible with devices that
have a Mini-B or Micro-B USB charge port.
PrOduCt featureS
Zero power consumption when not in use
Push-button start
Auto-off function
- Conserve Valet turns off when
all devices are charged.
- Conserve Valet will power down after two
minutes if all the devices are disconnected.
Auto-restart function
- Conserve Valet senses when you plug
in an additional device and restarts
the charge time to ensure the added
device receives a full charge.
Cord management
- Inner spool for cord storage
and management
-
Cut-out clips located underneath
tray to secure cord placement
4x USB output (3 located on
rear side,1 located on side for
easy-access charging)
1x (0.3m) USB Type A to
Mini-B cord included
1x (0.3m) USB Type A to
Micro-B cord included
Universal IEC C8 AC power inlet
1 x (1.3m) IEC C7 “figure 8” power
cord included
5
