51
Belinea o.center
Power Cords
The power cord set included in the server meets the requirements for use in the country
where the server was purchased. If this server is to be used in another country, purchase
a power cord that is approved for use in that country.
The power cord must be rated for the product and for the voltage and current marked on
the product's electrical ratings label. The voltage and current rating of the cord should be
greater than the voltage and current rating marked on the product. In addition, the cross-
sectional area of the wires must be a minimum of 1.00 mm² or 18 AWG, and the length of
the cords must be between 1.8 m (6 feet) and .6 m (1 feet). If you have questions about
the type of power cord to use, contact an authorized service provider.
Route power cords so that they will not be walked on or pinched by items
placed upon or against them. Pay particular attention to the plug, electrical
outlet, and the point where the cords exit from the product.
