9
Belinea o.center
/
Notes on Electrical Safety
• Before installing or removing signal cables, ensure that the power cords for the sys-
tem unit and all attached devices are unplugged.
• To prevent electric shock hazard, disconnect the power cord from the electrical outlet
before relocating the system.
• When adding or removing any additional device to or from the system, ensure that
the power cords for those devices are unplugged before the signal cables are con-
nected. If possible, disconnect all power cords from the existing system before you
add a device.
• Use one hand, when possible, to connect or disconnect signal cables to prevent a
possible shock from touching two surfaces with different electrical potentials.
/
Note on Battery Replacement
This server is provided with an internal Lithium battery or battery pack. There is a danger of
explosion and risk of personal injury if the battery is incorrectly replaced or mistreated.
For more information about battery replacement or proper disposal, contact an authorized
reseller or your authorized service provider.
This product is equipped with a three-wire power cord and plug for user
safety. Use the power cord with a properly grounded electrical outlet to
avoid electric shock.
Motherboards, adapters, and disk drives are sensitive to static electricity
discharge. These devices are wrapped in antistatic bags to prevent this
damage. Take the following precautions:
• If you have an antistatic wrist strap available, use it while handling the de-
vice.
• Do not remove the device from the antistatic bag until you are ready to
install the device in the system unit.
• With the device still in its antistatic bag, touch it to a metal frame of the
system.
• Grasp cards and boards by the edges. Hold drives by the frame. Avoid touch-
ing the solder joints or pins.
• If you need to lay the device down while it is out of the antistatic bag, lay it
on the antistatic bag. Before picking it up again, touch the antistatic bag and
the metal frame of the system unit at the same time.
• Handle the devices carefully to prevent permanent damage.