Belinea 2225 S1W
-
Operating Instructions
-
ENGLISH
Figure 4. Monitor features
IMAGE SETTINGS USING THE OSD MENU
CONFIGURATION
Monitor setup under Windows
®
9x/ME/000
and XP ..........................................................................
If using the monitor under Windows
®
9x/ME/2000 or
XP, we strongly recommend installing the Belinea con-
figuration file. you can obtain this file from your Belinea
dealer or download it from the MAXDATA FTP server at
ftp.maxdata.com.
Here, click the “Belinea_Treiber_
Driver” directory and download the
Belinea.inf
and
README_Belinea.TXT
files. Follow the installation
instructions in the
README_Belinea.TXT
file.
Monitor setup under Windows
®
NT .0 ..................
Under Windows
®
NT 4.0 no separate setup file is
required. Select the vertical frequency and the number
of colors directly from within the “Settings”
“Control
Panel”
“Display”
“Settings” menu.
BASIC SETUP
Automatic Image Adjustment .................................
you can adjust the image settings (such as image posi
-
tion, phase, etc.) manually or by using the LCD monitor’s
automatic image adjustment feature. This will adjust the
image parameters to their optimal settings for the cur-
rent graphics mode. Press AUTO (
in fig. 4) to launch
the automatic adjustment. The process will take a short
while until completed.
Shortcut for adjusting contrast and brightness...
you can adjust contrast and brightness directly by press
-
ing the
or
buttons (
and
in fig. 4) while the
OSD menu is not displayed. Press the
button to
increase the contrast/brightness or
to decrease it.
Setting the volume directly.....................................
You can adjust the volume directly by pressing button
EXIT (
in fig. 4) when the OSD menu is not displayed
on screen. You can then change the volume by pressing
the buttons
or
(
and
in fig. 4).
The OSD menu is a window on your screen that allows
you to view and change display settings. To change an
OSD setting:
1.
Press the ENTER button (
in fig. 4) to display the
OSD menu on the screen.
.
There are a total of 9 OSD submenus divided by
categories. Select the desired submenu by pressing
the OSD button
or
buttons (
and
in fig.
4;
see section “OSD Menu Functions”).
.
Press the ENTER button (
in fig. 4) to activate the
selected function or associated submenu.
.
If you selected a submenu, now select the subfunc-
tion you want using the
or
OSD buttons
(
and
in fig. 4)
.
.
Set the desired value using the OSD button
or
(
and
in fig. 4).
6.
Press the ENTER button (
in fig. 4) to save the set
-
ting. Repeat steps 2–5 to make further adjustments
as needed.
7.
The OSD menu automatically disappears if no
changes are made for more than 30 seconds (default
setting). The current settings will be saved. you can
close it manually by pressing the EXIT (
in fig. 4)
button.
