1.This heater should be installed by a competent person, i.e. a qualified electrician.
2.Always disconnected the heater from the electricity supply and allow it to cool before installation.
3.This heater can be heat directly.
4.The supply cable must be at the lower end of the heater if the heater is installed at an angle or vertically.
5.Keep the supply cord away from the body of the heater which will get hot during use.
6.Do not install the heater on an inflammable surface.
7.Observe the minimum safe distance between the heater body and the inflammable surfaces when mounted.
8.If the heater is to be used outside, a weatherproof outlet is recommended.
9.Before drilling ensure that there are no wires or water pipes in the area where the heater is to be installed.
10.The heater must be installed on the mounting chain provided.
11.Fasten the chain securely to the mounting surface.
12.Fasten the heater securely on the chain.
INSTALLATION AND ASSEMBLY
Please check all the items against the parts list after opening the box. Only all the items are complete, the
installation could be followed.
2
、
Requirements of Installation:
Do not allow children to install the equipment.
Keep 35cm distance form heater to ceiling.
Keep at least 80cm distance between heater and surrounding.
Keep at least 180cm height form heater to ground.
