10
First steps
Gigaset C590/C595 / BEL EN / A31008-M2101-E101-1-3F19 / starting.fm / 11.08.2009
Ve
rs
ion 4,
16
.09.
2005
Setting up the base
The base is designed for use in enclosed dry rooms with a temperature range
of +5°C to +45°C.
¤
Install the base on a level, non-slip surface in a central location in your house
or flat or mount the base on the wall
¢
page 76.
The phone's feet do not usually leave any marks on surfaces. However, due to
the multitude of different varnishes and polishes used on today's furnishings,
the occurrence of marks on the surfaces cannot be completely ruled out.
Please note:
u
Never expose the telephone to the influence of heat sources, direct sunlight
or other electrical devices.
u
Protect your telephone from moisture, dust, corrosive liquids and vapours.
Connecting the base
¤
First
connect the
mains adapter
1
.
¤
Then
connect the
telephone jack
2
and insert the
cables into the
cable ducts.
Please note:
u
The mains adapter must
always be connected
, as the phone will not oper-
ate without a mains connection.
u
Only use the mains adapter and phone cord
supplied
. Pin connections on
telephone cables can vary (pin connections
¢
page 75).
Please note
Pay attention to the range of the base.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside
buildings. The range is reduced when Eco Mode (
¢
page 55) is activated.
1
1
1
2
