BELGACOM Twist 545, User Manual

Page: 45 / 56

41
S
ETTINGS
H
ANDSET SETTINGS
Registering a new handset to a
base
To register a new handset to a base you
must:
•
put the handset in registration mode,
• put the base in registration mode.
Once this is done, the registration (mutual
recognition of the base and the new handset)
will be done automatically (registration can
take a few seconds).
Take the handset to be registered:
On the navigator key , press or
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET. using or .
Press Valid. .
Select SET HANDSET using or . Press
Valid. .
Select REGISTRATION . Press Valid. .
Press Yes to put the handset in
registration mode.
The handset enters the registration mode.
On the base:
Put the base to which you want to register the
handset in registration mode:
• For the Twist 545, press on the
If the code of the base has been
modified (different from 0000), the
registration will not be possible with
this procedure, refer to paragraph
Personal registering , page 42
button on the base for a few seconds.
• For other base stations, refer to their
user guides.
The green light blinks rapidly, the base is in
registration mode.
The new handset and the base are mutually
searching for each other. The registration
may take several seconds.
Once the handset is registered, the handset
automatically exits the registration mode and
lets you know the registration is done.
Modifying the base preference
This function enables you to specify which
base will be used by your handset to make
calls (if your handset is registered to several
bases).
On the navigator key , press or
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET. . Press Valid. .
Select SET HANDSET . Press Valid. .
Select BASE PRIORITY using or .
Press Valid. .
An information screen presents the current
base preference for your handset.
•
To keep the preference, press Valid. .
• To modify the preference, press Edit .
You can also set your base to the
registration mode using a handset
already registered by selecting the
Registration function in the menu
SETTINGS/ADVENCED SET/SET
BASE.
Livre du D6O.book Page 41 Lundi, 14. mars 2005 10:57 10