50
20403036en_ba_a0
PBX access
Compatibility
Your telephone is designed for use in the analogue telephone network and can be operated
on a PBX that supports DTMF dialling and flash signalling.
Exchange Access Code EAC
You may need to enter an exchange access code (e.g. 0) to allow the public exchange
to assign an external line for external calls or for calling back numbers in the calls list.
Entering the EAC
Procedure:
1. Press the softkey under
MENU
. Scroll to
PBX
in the
SETTINGS
menu and press
OK
to confirm.
2. Enter the exchange access code.
Note
• After having programmed an exchange access code you do not have to
enter it again in a directory entry. However, if you dial off-hook or in call
preparation you still have to enter the exchange access code manually.
• This exchange access code is saved in the handset. The relevant settings
have to be repeated for each handset.
• To give the exchange sufficient time to assign a public line, you may need
to program a “pause” after the exchange access code by pressing and
holding down
.
• For further information, refer to your PBX operating instructions.
Summary of Contents for Twist 476
Page 58: ...56 20403036en_ba_a0...
Page 59: ......
