26
20403036en_ba_a0
Three-party conference call
You can set up a three-party conference call by connecting an external call partner and a
second handset (internal), or by connecting two external call partners:
Three-party conference call with an internal/external call partner
If you are conducting a call:
1. Press
INT
and dial the relevant handset. The external caller is put on hold.
2. If the second handset answers, you can talk to the internal call partner without the exter-
nal caller hearing you.
3. Press the softkey under
OPTION
,
ALTERNATE
to talk to each call partner individually,
or press the softkey under
OPTION
,
JOIN
to connect all three call partners with each
other. To return to brokering, press the softkey under
OPTION
,
END CONFERENCE
.
Each call partner can leave the conference call by pressing
Note
• You cannot use the
INT
key if the call duration is not displayed.
• If the second handset does not answer, you can end the ringing signal and
return to the original call by pressing the softkey under
END
.
Three-party conference call with two external call partners
If you are conducting a call:
1. Press the softkey under
OPTION
,
INIT. 2ND CALL
.
2. Enter the number (the active call is put on hold).
3. When the seond call partner answers, press the softkey under
OPTION
,
3PTY
.
Note
You can also set up a three-party conference call after you have accepted a
second incoming call.
Telephoning
Summary of Contents for Twist 476
Page 58: ...56 20403036en_ba_a0...
Page 59: ......
