4
Precautions
It’s important that the operator is aware of and understands hazards common to the operation
of any transceiver .Please observe the following safety precautions to prevent transceiver damage or
personal injury. The following precautions shall be observed during operation, service and repair of
this transceiver.
◆
The recommended usage rate is 1 minute for TX and 4 minutes for RX , when the transceiver is
used for transmission for many hours Continuously, the radiator and chassis will become hot, don’t
allow the rear panel of the transceiver to contact surface of low melting point /low Ignition point
object.
◆
Don’t leave the transceiver in direct sunlight for a long time , Don’t place the transceiver on extremely heat,
damp, dusty area, and don’t put it on unstable surfaces.
◆
When restriction or warnings are posted regarding the use of radio devices, please obey the regulation turn the
transceiver power off.
◆
Use of the transceiver while you are driving may be against traffic laws, please prohibit using it .
◆
If you notice any problems on the transceiver, please turn off at first. Then contact with local dealer. Do not
modify this transceiver unless instructed by this manual or refer service to a qualified licensed or certified
technician only.
◆
If you want to use the machine for secondary development, Please contact with BelFone’s technical engineer
or dealer for technical assistance.
◆
Please keep the surface of transceiver is clean and dry, clean the transceiver using a cloth moistened with clean
water and a mild dishwashing liquid.
