BelFone BelFone Series Manual Download

Page: 52 / 52

[email protected]

Audio Distortion

≤5%

Transmitter

RF Output Power

High Power：4W

Low Power：1W

Conducted Spurious Emission

-36dBm<1GHz/-30dBm>1GHz

Modulation Limiting

FM Noise

Audio Distortion

≤5%

Note:

1. The max working temperature including: master radio, battery and power adaptor;

2. Please turn off the power of the radio before charging, and prohibit operating the radio

while charging;

3. All specifications are tested according to applicable standards, and subject to change

without notice due to continuous development.

Statement

Our Company endeavors to achieve the accuracy and completeness of this

manual, if you have any question, you can contact with us, we will make a

detailed answer to you in time. All the above specifications and design are

subject to change without prior notice due to continuous development.

Summary of Contents for BelFone Series





















































Search results

Summary of Contents for BelFone Series

Reviews:

Related manuals for BelFone Series

Brands by name

Popular brands

BelFone BelFone Series, Manual

Search results

Summary of Contents for BelFone Series

Reviews:

Related manuals for BelFone Series

Brands by name

Popular brands