You can set battery saver time ratio as: 1:1, 1:2, 1:3, 1:4, the default setting is
1:2.
Low Battery Warning
When your battery gets low, LED indicator glows red and
“Please Charge”，please replace the
radio will turn off automatically while battery is too low.
Monitor
On analog or digital channel, enable the Monitor feature, the icon:
Press and hold down the programmed [Monitor Momentary] key to activate the
monitor function, release the key to exit monitor mode; or
[Monitor On/Off] key enable the monitor feature, the radio will remain on
monitor mode until press it again to exit.
Adjusting the Squelch Level
On the analog mode, this feature allows you to adjust the squelch threshold
required for the radio to un
is strong, squelch level can be adjust higher;
the signals is weak, squelch level can be adjust lower, the appropriate squelch
level depends on the ambient RF noise conditions. You can set SQL level as:
46
You can set battery saver time ratio as: 1:1, 1:2, 1:3, 1:4, the default setting is
Low Battery Warning
When your battery gets low, LED indicator glows red and with a
please replace the battery or charge the battery in time. The
radio will turn off automatically while battery is too low.
On analog or digital channel, enable the Monitor feature, the icon:
Press and hold down the programmed [Monitor Momentary] key to activate the
monitor function, release the key to exit monitor mode; or press programmed
[Monitor On/Off] key enable the monitor feature, the radio will remain on
ss it again to exit.
Adjusting the Squelch Level
On the analog mode, this feature allows you to adjust the squelch threshold
required for the radio to un-mute. If two radios at a close distance, the signals
is strong, squelch level can be adjust higher; If two radios at a long distance,
the signals is weak, squelch level can be adjust lower, the appropriate squelch
level depends on the ambient RF noise conditions. You can set SQL level as:
You can set battery saver time ratio as: 1:1, 1:2, 1:3, 1:4, the default setting is
warning tone:
battery or charge the battery in time. The
On analog or digital channel, enable the Monitor feature, the icon:
appears.
Press and hold down the programmed [Monitor Momentary] key to activate the
press programmed
[Monitor On/Off] key enable the monitor feature, the radio will remain on
On the analog mode, this feature allows you to adjust the squelch threshold
f two radios at a close distance, the signals
f two radios at a long distance,
the signals is weak, squelch level can be adjust lower, the appropriate squelch
level depends on the ambient RF noise conditions. You can set SQL level as:
