7
Instructions for Use
Before First Use
Before using the steam cleaner for the first time, clean the exterior surface with a soft,
damp cloth and dry thoroughly. Do not immerse the steam cleaner in water or any other
liquid.
A
ssembling the All Floors Steam Cleaner
Attaching the Handle
STEP 1
: Attach the removable handle to the steam cleaner main body by sliding the
bottom of the handle into the steam cleaner main unit until it locks into position.
NOTE
: The handle can be removed easily for storage by pressing the handle release
button and pulling it away in an upwards direction.
Attaching the Precision Shaped Mop Head
STEP 1
: Slide the bottom end of the steam cleaner main body onto the precision shaped
mop head, until the precision shaped mop head spindle clicks into place.
STEP 2
: Always attach the precision shaped mop head using both hands, making sure
that it is locked securely into position.
STEP 3
: To remove the precision shaped mop head, simultaneously press the mop head
release button and pull the steam cleaner main body upward.
NOTE
: The precision shaped mop head will only fit one way onto the steam cleaner
main body; make sure that it is correctly aligned.
WARNING
: Never force the steam cleaner main body onto the precision shaped mop
head, as this could damage the steam cleaner.
Attaching the Mop Head Pad
STEP 1
: Remove the precision shaped mop head from the steam cleaner main body
following the instructions in the section entitled “Attaching the Precision Shaped Mop
Head”.
STEP 2
: Attach the mop head pad to the precision shaped mop head and press down
firmly.
STEP 3
: Reattach the precision shaped mop head to the steam cleaner main body
following the instructions in the section entitled “Attaching the Precision Shaped Mop
Head”.
NOTE
: The mop head pad must be installed correctly before use on carpets or hard
floors. Do not use the steam mop without the mop head in place.
