This product may be protected by one or more patents • For further information, please visit: www.ppc-online.com/patents
[email protected] • 1-800-800-6652 • www.ppc-online.com
HAPI™ Miniflex
®
Cable
Installation Tool
User Manual
After the cable and microduct setup is complete and the cuff and grip are positioned for maximum comfort, it is time
to install the cable.
It is recommended:
•
Not to exceed 120 revolutions per minute (2 per second)
•
Maintain a constant speed and force throughout the pushing phase
– The speed should be gradually decreased as the distance increases. Operators should find that this is a natural
response as the force required to push the cable increases.
– The operator should look for feedback from the crank handle throughout the installation to help determine if the
cable is installing correctly.
– Cable slip, a badly prepared microduct route, inappropriate cable pay-off and suboptimal cable / microduct
combinations can all be identified by the kinesthetic feedback from the HAPI™ Tool.
– As soon as the maximum pushing force is felt or if the cable begins to slip on the drive wheel, immediately stop
turning the handle to prevent tyre wear. Consult the troubleshooting section of this user guide.
3.7 Cranking the Handle
19
Summary of Contents for PPC HAPI Miniflex
Page 1: ...HAPI Tool User Manual ...
