This product may be protected by one or more patents • For further information, please visit: www.ppc-online.com/patents
[email protected] • 1-800-800-6652 • www.ppc-online.com
HAPI™ Miniflex
®
Cable
Installation Tool
User Manual
The tensioning system is maintained by a coil spring to balance the load placed on the cable.
Tension is required to prevent excessive cable slip and tyre wear, however, it is not necessary to apply excessive
force on the cable to install successfully.
Over-tightening the tensioning knob increases the force required to turn the drive wheel and result in excessive effort
being required to turn the crank handle.
The auxiliary wheel is lowered and raised by turning the Tensioning
Knob — Clockwise to lower the wheel and counter-clockwise to raise
the wheel.
During setup, the wheel must be raised to allow the cable to be inserted,
then lowered to retain the cable in its correct position between the
auxiliary and drive wheels.
Auxiliary wheel in open position
Auxiliary wheel in closed position
3.6 Correct Use of the Tensioning Knob
18
Summary of Contents for PPC HAPI Miniflex
Page 1: ...HAPI Tool User Manual ...
