Belden Lumberg Automation 0970 ESL 601 Technical Manual Download Page 3

Page: 3 / 30

Technical Manual

LioN-Link PROFINET

Subject to change without notice!

Version 1.2 / August 2014

Page 3 of 30

7. The integrated web server .................................................................................................. 23

7.1.

The homepage (Overview) ........................................................................................... 23

7.2.

The configuration page (Configuration) ....................................................................... 24

7.3.

The monitoring page (Monitoring) ............................................................................... 25

8. Firmware update................................................................................................................. 26

9. Alarm and error messages of the BusHead ........................................................................ 27

9.1.

Evaluation of alarms in

STEP7

.................................................................................... 27

9.1.

Reaction of the BusHead to a module breakdown („pull “ alarm) ............................... 27

9.2.

Channel diagnostics .................................................................................................... 28

10. Technical data .................................................................................................................... 29

10.1. General data ................................................................................................................ 29

10.2. Technical data of the bus system ................................................................................ 29

10.3. Technical data of the power supply for the BusHead electronics ............................... 29

10.4. LED indicators ............................................................................................................. 30

Summary of Contents for Lumberg Automation 0970 ESL 601































Search results

Summary of Contents for Lumberg Automation 0970 ESL 601

Reviews:

Related manuals for Lumberg Automation 0970 ESL 601

Brands by name

Popular brands

Belden Lumberg Automation 0970 ESL 601, Technical Manual

Search results

Summary of Contents for Lumberg Automation 0970 ESL 601

Reviews:

Related manuals for Lumberg Automation 0970 ESL 601

Brands by name

Popular brands