background image

16

Installation SPIDER II

Release 07 10/2013

1.3

Ethernet ports

1.3.1

10/100 Mbit/s twisted pair port

This port is an RJ45 socket.
The 10/100 Mbit/s twisted pair port offers you the ability to connect network 
components according to the IEEE 802.3 10BASE-T/100BASE-TX standard.
This port supports:

Autonegotiation 

Autopolarity 

Autocrossing

100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode

10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode

1.3.2

10/100 Mbit/s PoE port

The socket housing is electrically connected with the front panel.
This port is an RJ45 socket.
The 10/100 Mbit/s PoE port allows you to connect network components as a 
PoE voltage sink according to the standard IEEE 802.3 10BASE-
T/100BASE-TX and IEEE 802.3af.
This port supports:

Autonegotiation 

Autopolarity 

Autocrossing

100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode

10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode

Power over Ethernet (PoE, at the last four ports of the device)

The PoE voltage is supplied via the wire pairs transmitting the signal 
(phantom voltage).

Pin

Function

1

RD+

Receive path

2

RD

Receive path

3

TD+

Transmission path

6

TD

Transmission path

4,5,7,8

Table 6:

Pin assignment of the 10/100 Mbit/s twisted pair port, RJ45 socket, MDI-X 
mode

1

2

3

4

5

6

7

8

Summary of Contents for HIRSCHMANN SPIDER II





































Reviews: