SPIDER II
Release 04 09/09
13
Device variants SPIDER II 8TX PoE support Power over Ethernet (PoE) in
accordance with IEEE 802.3af.
They allow the connection and remote supply of, for example, IP telephones
(Voice over IP), webcams, sensors, printer servers and WLAN access points
via 10BASE-T/100BASE-TX. With PoE, these terminal devices are powered
by the twisted-pair cable.
The SPIDER II 8TX PoE devices provide four 10BASE-T/100BASE-TX ports
(RJ45 sockets) for connecting network segments or PoE terminal devices
(PD, Powered Device) for all IEEE802.3af classes up to a maximum power
output of 15.4 W.
The 4 PoE-capable ports are the 4 bottom ports of the device (see
fig. 3
). On
the device, the PoE ports are highlighted in red.
The current is supplied on wire pairs transmitting the signal; the individual
ports are not electrically insulated from each other.
The following conditions are met in accordance with IEEE 802.3af:
X
Endpoint PSE
X
Alternative A
The devices also provide you with the following options for selecting the vari-
ant you desire:
The following data applies in a cross-variant manner:
The devices comply with the specifications of the standard(s):
X
ISO/IEC 8802-03 10BASE-T/100BASE-TX/1000BASE-T
X
ISO/IEC 8802-03 100BASE-FX
X
ISO/IEC 8802-03 1000BASE-SX/LX
Operating temperature
Standard
0 °C to +60 °C
Extended
-40 °C to +70 °C
Operating voltage
SPIDER II without PoE
SPIDER II 8TX PoE
9.6 to 32.0 V DC
18.0 to 32.0 V DC
Safety extra-low voltage (SELV)
Relevant for North America: Nec
Class 2 power source max. 5A.
Software variant
Unmanaged
Certifications / declarations
pending
UL508 (E175531)
Summary of Contents for Hirschmann SPIDER II 8TX
Page 27: ...27 SPIDER II Release 04 09 09 ...
Page 29: ......
