Belden Hirschmann RED25 Series, User Manual

Page: 22 / 40

22
Installation RED25
Release 01 02/2015
2 Installation
The devices have been developed for practical application in a harsh indus-
trial environment.
On delivery, the device is ready for operation.
Perform the following steps to install and configure the device:

Checking the package contents
 Installing and grounding the device
 Installing an SFP transceiver (optional)
 Connecting the power supply and signal lines

Operating the device

Connecting data cables
 Filling out the inscription label
 Making basic settings
2.1 Checking the package contents
Proceed as follows:

Check whether the package includes all items named in the section
“Scope of delivery” on page 37 .

Check the individual parts for transport damage.
2.2 Installing and grounding the device
WARNING
FIRE HAZARD
Install the device in a fire protected enclosure according to EN 60950-1.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.