Belden Hirschmann RED25 Series, User Manual

Page: 23 / 40

Installation RED25
Release 01 02/2015
23
2.2.1 Installing the device onto the DIN rail
Verify that the device maintains the minimum clearing in order to meet the
climatic conditions:

Verify that there is at least 4 in (10 cm) of space above and below the
device.

Verify that there is at least 0.8 in (2 cm) of space on the right and left sides
of the device.
To mount the device onto a horizontally mounted 35 mm DIN rail according
to DIN EN 60715, proceed as follows:

Slide the upper snap-in guide of the device into the DIN rail.

Press the media module downwards onto the clip-in bar.

Snap in the device.
2.2.2 Grounding the device
The device has a functional ground connection.

Ground the device via the ground screw.
2.3 Installing an SFP transceiver (optional)
For this device, only use suitable SFP modules from Hirschmann.
See “Accessories” on page 37.