Installation RED25
Release 01 02/2015
27
3
Making basic settings
Note:
Two or more devices configured with the same IP address can cause
unpredictable operation of your network.
Install and maintain a process that assigns a unique IP address to every
device in the network.
The IP parameters must be entered when the device is installed for the first
time. The device provides the following options for configuring IP addresses:
Entry via V.24 connection
Entry with the aid of the HiDiscovery logs on the applications HiDiscovery
or Industrial HiVision
Configuration via BOOTP
Configuration via DHCP (Option 82)
ACA21-USB/ACA22-USB
Further information on the basic settings of the device can be found in the
user manual on the CD/DVD.
Default settings
IP address: The device looks for the IP address using DHCP
Management password:
user, password: public (read only)
admin, password: private (read/write)
V.24 data rate: 9,600 Baud
Ethernet ports: link status is not evaluated (signal contact)
Optical ports: Full duplex
TP ports: Autonegotiation
RSTP (Rapid Spanning Tree) activated
Summary of Contents for Hirschmann RED25 Series
Page 40: ......
