Page
52
of
100
OpEdge
Industrial Edge Gateway – Release 01.0.00 – 10/2022
1
In the
Incoming
section of the
File Relay
tab, select the
FTP
or
SFTP
protocol to enable
FTP or SFTP Incoming file transfer.
2
Use the following table to enter the appropriate parameters:
Parameter
Description
Incoming
Protocol
FTP (File Transfer Protocol)
SFTP (Secure File Transfer Protocol)
User
The user name is for uploading files through FTP to the Internal storage.
The default value is
f-relay
.
Password
Password for FTP access. The password must have at least 8 characters,
contain at least one uppercase letter, one lowercase letter, and one special
character.
Outgoing
Protocol
Protocol of the server used as final destination for the File Relay.
Supported protocols for upload are FTP/SFTP/Belden Horizon
URL
URL of the server used as final destination for the File Relay.
•
Supported protocols for upload are FTP/SFTP/Belden Horizon
•
For FTP the format is specified in the field:
ftp://user@host/
•
For SFTP the format is:
sftp://user@host:port/
Password
Password used to upload to the remote server. You can view the
configured value by pressing the "eye" button.
•
Password is used only for FTP
Host Key
Public Key that authenticates SFTP Server and proves its
identity to OpEdge client. This should be copied from SFTP
Server and pasted here.
Public Key from SFTP Server should be exported as
OpenSSH
format.
SSH-Key
SSH-Key is the public key that authenticates the SFTP Server user for file
transfer. Once generated, it should be copied to the SFTP Server as a .pub
file and associated with the designated user.
The SSH-Key pair generation takes place the first time it is requested.
Subsequent requests return the same public key.
SSH keys will be removed upon gateway factory reset.
•
Used only for SFTP
Daily Upload Time
The upload time, shown in the Local UI is UTC – similar with the time on
the
Overview
page. Default time value is 03:00.
3
Click
A
PPLY
when complete.